Hi,
@Mad76 ,
@porl69 ,s link works ok on my phone.
Here it is in full in case there's some sort of phone glitch:
https://github.com/NightscoutFoundation/xDrip/releases
It should open at the page in the puc below, you would then click "Assets" and download and install the apk file.
Another option is to go this page and click the "Download latest APK" link.
https://jamorham.github.io/
If you can get xDrip+ installed, I'd close and uninstall glimp - MM can get confused if there's more than one cgm app on the phone fighting for its attention. I'd maybe also get rid of librelink too, if you have it.
If/when you get xDrip+ installed, you then do this:
Put MM on top of the sensor.
Open the main menu in xdrip, the three vertical lines hamburger menu at top left, then select Settings, then Hardware Data Source, and choose the option Libre Bluetooth. That tells it to look for MM.
Then go back to the main menu, and this time select Bluetooth Scan, then Refresh. That should bring up the name of your MM. It's so long since I set mines up, I'm forgetting the details, but I think you may have to tap the name.
Then just sit back and wait a while, 5, 10 mins until it gets a reading or two, and it'll then ask you to enter a bg reading as a calibration to get it going.
Another way is to long press the xdrip blood drop icon, a screen comes which has an option to switch on the Source Wizard Button. Select that then click the SWB, and it takes you through the steps above.
All this stuff just really needs to be done once - you don't need to repeat it when you change sensors in the future.
Good luck!
View attachment 35594