Anyone has this problem before or know of any fixes?
around 10-1 my libre seems to stop capturing data
Have you tried ringing Abbott for advice?
(Unfrtunately my libre 1 experience is too out of date to assist.)
Do you scan between 10pm and 9am? You have to scan at least once every 8 hours otherwise you will lose data.
The sensor only stores 8 hours of data so you MUST scan at least once every 8 hors otherwise there is a data gap as you are seeing if you are not scanning often enough.
You need to scan last thing before you turn the light off, then no more than 8 hours later. So if you scan at 10pm then you need to scan again before 6am to avoid losing any data.
certainly if you scan at 10 then not until 7 you will have an hours gap between 10 and 11.
its a need to time the scans effectively, not necessarily scanning more often. You could try setting an alarm to ping at 10 and 6 to remind you for a while until it becomes habit.
You need to scan last thing before you turn the light off, then no more than 8 hours later. So if you scan at 10pm then you need to scan again before 6am to avoid losing any data.
certainly if you scan at 10 then not until 7 you will have an hours gap between 10 and 11.
its a need to time the scans effectively, not necessarily scanning more often. You could try setting an alarm to ping at 10 and 6 to remind you for a while until it becomes habit.
If you do it every night after a while it becomes routine…..just like cleaning your teethThank you for that! I will definitely start scanning last thing at night a little more, I’m always awake at 6 so that shouldn’t be a problem!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?