Just to let you know that I have been able to apply for a Yellow Card and written my concerns about these needles. I have had a notice back saying it has been registered, whether I get a response from the manufacturers is extremely unlikely in my view. Thanks for your help!Just go with devices and they'll tell you if it's wrong and move it to the right one.
Good luck and let me know how you get on and if you're successful!I will know after 2 pm tomorrow if i have been successful getting BD needles back without a gp appointment. I've had to discard a few gluco needles today because they bent as i screwed them on. I've never thrown the others away so it seems false economy to me
I'm a bit late in replying I too do the little shot first before drawing up my dose, as this was my breakfast insulin it was the first time I used that particular needle!Now funny enough.. I've seen the BD micros on some occasions push out from the 4mm position when screwing to the pen due to the plastic body of not gripping the needle, thus pushing it out due to resistance in the rubber membrane on the insulin cartridge?
I've changed the needle imidiatly, testing the replacment as I normally do with an "airshot."
The needle left in your skin. Was this after single use? (Silly question I know. But needs to be asked.)
I'm not understanding this. My Gluco Rx 5mm are supplied in a sturdy 'holder' which allows the needle to be screwed on, the holder then removed for injection, and the 'holder' then used for needle removal. Easy peasy.I've had to discard a few gluco needles today because they bent as i screwed them on.
http://www.diabetesforecast.org/2015/mar-apr/images/insulin-pen-needles-main-Mar15.jpgI'm not understanding this. My Gluco Rx 5mm are supplied in a sturdy 'holder' which allows the needle to be screwed on, the holder then removed for injection, and the 'holder' then used for needle removal. Easy peasy.
Are yours different ?
Geoff
Keep your eye on them!!I was moved from BD needles to Gluco RX over 2 years ago. Whilst I don't think they puncture the skin as easily as the BD pentapoint design, I've not experienced any of the issues you've highlighted.
The problem that I and other people seem to have with them is that the needle not only bends but comes away from the main body of the needle.I'm concerned about this because the needle stayed in my leg once I'd taken my pen away after injecting. As you can imagine I find this really dangerous as I had to remove the needle using a pair of tweezers. I'm pleased that you haven't had any problems with these needles!http://www.diabetesforecast.org/2015/mar-apr/images/insulin-pen-needles-main-Mar15.jpg
Mine look like the clear plastic ones here.
Geoff
Hi Geoff, it's the needle coming out of the 'sturdy holder' and remaining in my leg i.e. the needle has completely come away from the clear plastic holder for the needle!http://www.diabetesforecast.org/2015/mar-apr/images/insulin-pen-needles-main-Mar15.jpg
Mine look like the clear plastic ones here.
Geoff
The needles in your picture don't seem to be the GlucoRx, the needles that we're concerned about have a yellow paper seal on the top, none of the ones in your picture are them!Hi Geoff, it's the needle coming out of the 'sturdy holder' and remaining in my leg i.e. the needle has completely come away from the clear plastic holder for the needle!
The last time I went to my Diabetic Clinic I spoke to my Consultant and she gave me a handful of my usual needles that I've been using for last 20+ years!Any issues have a word with your Consultant/DSN if under a hospital diabetes clinic, they'll write to your Dr and ask that your prescription is changed back to the BD Microfine needles. Good luck.
The problem that I and other people seem to have with them is that the needle not only bends but comes away from the main body of the needle.I'm concerned about this because the needle stayed in my leg once I'd taken my pen away after injecting. As you can imagine I find this really dangerous as I had to remove the needle using a pair of tweezers. I'm pleased that you haven't had any problems with these needles!
The last time I went to my Diabetic Clinic I spoke to my Consultant and she gave me a handful of my usual needles that I've been using for last 20+ years!
You've lost me again. I screw the sturdy holder over the threaded end of my FlexPen. I pull the sturdy holder away from the FlexPen, leaving a less sturdy plastic part holding the needle. I inject, then use the sturdy holder, by pushing it over the needle, to grip the less sturdy plastic part and unscrew it. The needle and less sturdy part are now inside the sturdy holder, and all together they end up in my sharps bin.Hi Geoff, it's the needle coming out of the 'sturdy holder' and remaining in my leg i.e. the needle has completely come away from the clear plastic holder for the needle!
Perhaps I'm blessed with baby skinit is logical that an unnoticed loose needle could draw through the plastic screw fitting &'stay in the skin regarding your own experience.
Which is indeed worrying..
You've lost me again. I screw the sturdy holder over the threaded end of my FlexPen. I pull the sturdy holder away from the FlexPen, leaving a less sturdy plastic part holding the needle. I inject, then use the sturdy holder, by pushing it over the needle, to grip the less sturdy plastic part and unscrew it. The needle and less sturdy part are now inside the sturdy holder, and all together they end up in my sharps bin.
Perhaps you could find a picture of yours ?
Geoff
p.s. my picture may not be of Gluco Rx but it does look like my Gluco Rx. Two sturdy holders with their less sturdy plastic part (with it's needle) and a less sturdy part on its own.
In the early days of injecting, we were told to always have a biro to hand, and if a needle broke to encircle it with biro until you could get it out with forceps or tweezers. I still do to this day, 40 years later, but never encountered the problem. Old habits die hard evidently, especially when perceived as sensible.The problem that I and other people seem to have with them is that the needle not only bends but comes away from the main body of the needle.I'm concerned about this because the needle stayed in my leg once I'd taken my pen away after injecting. As you can imagine I find this really dangerous as I had to remove the needle using a pair of tweezers. I'm pleased that you haven't had any problems with these needles!
I remember my dad doing this !In the early days of injecting, we were told to always have a biro to hand, and if a needle broke to encircle it with biro until you could get it out with forceps or tweezers. I still do to this day, 40 years later, but never encountered the problem. Old habits die hard evidently, especially when perceived as sensible.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?