• Guest, the forum is undergoing some upgrades and so the usual themes will be unavailable for a few days. In the meantime, you can use the forum like normal. We'd love to know what you think about the forum! Take the 2025 Survey »

LIBRE 2 PROBLEMS

P

peat5961

Well-Known Member
As I said in an earlier post have just started using Libre 2 after being on Libre1 for quite while I guess I was lucky to get mine changed over early (very late Dec)

& as good as it is with its alarms

Sounding on phone if I go low or high I really miss my xdrip+ & its settings.
like the alarm to warn you if you’re going low so you have time to do something & yes you can set the low alarm to go off at a higher level in libre 2 but.

I really miss xdrip+ and cannot get the libre 2 to work with it

Have got both Bubble & M M 2 but no joy nothing works

My xdrip (latest ver) sees the Bubble but gets no readings from it

If anyone has been self-funding with a Libre 2 & use xdrip+ could they reply to post & give me any info on how they set there’s up please
 
Have you tried patching the LibreLink app on your phone and configuring xDrip to take the readings direct from there without the need fro Miaomiao or Bubble?

I have not been lucky enough to see or hold a Libre 2 yet but this is the route I intend to take.

If you join the xDrip facebook group, you will find some very helpful people and instructions to direct you.
I think your chance of getting help on a dedicated xDrip group is more than a generic diabetes forum.
 
peat5961 said:
As I said in an earlier post have just started using Libre 2 after being on Libre1 for quite while I guess I was lucky to get mine changed over early (very late Dec)

& as good as it is with its alarms

Sounding on phone if I go low or high I really miss my xdrip+ & its settings.
like the alarm to warn you if you’re going low so you have time to do something & yes you can set the low alarm to go off at a higher level in libre 2 but.

I really miss xdrip+ and cannot get the libre 2 to work with it

Have got both Bubble & M M 2 but no joy nothing works

My xdrip (latest ver) sees the Bubble but gets no readings from it

If anyone has been self-funding with a Libre 2 & use xdrip+ could they reply to post & give me any info on how they set there’s up please
Click to expand...

Have you installed the oop2.apk patch?
 
Jaylee said:
Have you installed the oop2.apk patch?
Click to expand...

Did not try the patched app

Used a link and looked at it 4 or 5 times

But each time it looked way out of my league to get & set up my technical limit is to find the web page & download a apk file

If you know a link to a patched version of xdrip that is simple to get/set up I would to love to try it
 
In Response said:
Have you tried patching the LibreLink app on your phone and configuring xDrip to take the readings direct from there without the need fro Miaomiao or Bubble?

I have not been lucky enough to see or hold a Libre 2 yet but this is the route I intend to take.

If you join the xDrip facebook group, you will find some very helpful people and instructions to direct you.
I think your chance of getting help on a dedicated xDrip group is more than a generic diabetes forum.
Click to expand...

Have not tried that will look at patching into the LibreLink app

But did not think it would do this
 
In Response said:
Have you tried patching the LibreLink app on your phone and configuring xDrip to take the readings direct from there without the need fro Miaomiao or Bubble?

I have not been lucky enough to see or hold a Libre 2 yet but this is the route I intend to take.

If you join the xDrip facebook group, you will find some very helpful people and instructions to direct you.
I think your chance of getting help on a dedicated xDrip group is more than a generic diabetes forum.
Click to expand...

Sorry was thinking of something else when wrote

"Have not tried that will look at patching into the LibreLink app

But did not think it would do this" as reply

To use the LibreLink app you need as far as know

A Patched app of xdrip+ to make it work
this is what jaylee was talking about
 
no, u don't need a patched xdrip, just the patched librelink app... u do have 2 start the sensor with the patched librelink app tho so u have to wait until u apply a new sensor before u uninstall the current version and install the patched version

and like i said in my pm, i'd be willing to send it to you if patching it is a problem
 
peat5961 said:
Did not try the patched app

Used a link and looked at it 4 or 5 times

But each time it looked way out of my league to get & set up my technical limit is to find the web page & download a apk file

If you know a link to a patched version of xdrip that is simple to get/set up I would to love to try it
Click to expand...

Hi @peat5961 ,

Trying to track down where i originally found the OOP2.apk from is like trying to find Lord Lucan.
But i found a boffin site with alot of waffle to transcribe? & a lead..
I'll PM you the link to the patch file that (hopefully.) should help with xDrip..

Hope this helps..
 
j@mez said:
no, u don't need a patched xdrip, just the patched librelink app... u do have 2 start the sensor with the patched librelink app tho so u have to wait until u apply a new sensor before u uninstall the current version and install the patched version

and like i said in my pm, i'd be willing to send it to you if patching it is a problem
Click to expand...


Hi, I have been trying to patch libre 2 unsuccesfully. Any chance you could send me the patch apk? Thanks
 
dhpw o hpmoA xdmx\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\==============================
 
philip_john said:
Hey, thanks for the link, I'm not sure what this does? I'm looking to use the patched librelink app to connect my libre 2 to xdrip for Nightscout.
Click to expand...

Hi,

I believe it to set the Libre 2 algorithm up to work direct with Xdrip.?
I have to admit, I still use the L1 (though the mark twos are available in my area now.)
I've downloaded it but haven't installed.. Don't see the point of fixing what isn't broke.. Yet.
 
Back
Top