I am going on it tomorrow, currently on the dash which I love. When I first went on it I was having a lot of leaks, I was at the point of coming off. Then another user advised me to pinch up, but push down on the cannula end. I found if I did this Firmly, No leaks!!!Hi, I am currently using a Tandem T:slim with a Dexcom g6 I love the closed loop technology and use Control IQ all the time. I have the opportunity to move to Omnipod 5. The massive advantage is tubeless which really appeals to me. Does anyone have experience of the Omnipod 5? Bulkiness of the pod, connectivity issues with the pod and G6 having to be in line of site, is the algorithm similar to the T slim, does the hand held controller work well.
Any advice, pros/cons would be much appreciated. Thanks
How close to each other do DexcomG6 and Omnipod5 need to be? Currently I use Tandem t:slimX2. There is loss of signal between G6 on my waist and the pump, if I carry the pump in a pocket on the opposite side of the body..... a bit difficult sometimes to ensure the 2 devices are in sight of each other....
I was put on omni 5 yesterday. What a difference to the dash (which is good) FANTASTIC. I feel better, steadier. I could not be happier. Got to come off auto today though to change dexcom& transmitter.I am going on it tomorrow, currently on the dash which I love. When I first went on it I was having a lot of leaks, I was at the point of coming off. Then another user advised me to pinch up, but push down on the cannula end. I found if I did this Firmly, No leaks!!!
I'm going on Omnipod 5 soon I hope, I'm on Omnipod dash at moment, since April and can't get basal right, keep changing it, so hopefully Omnipod 5 with Dexcom g6 will answer my problems, love tubeless pumps, glad it's working out for you.Yes had a few ups and downs lately but improving. Most times I find to take half my meal bolus 12 mins before. Then the other half about 2 mins before meal. Bed time it's steady all through the night. Had to increase bolus
HiHi, I have been type 1 for 51 years and was given the Omnipod in 2015. In August of this year I was given the Omnipod 5 together with the Dexcom G6.
I also can’t compare to your pump but can say that I am very happy with my devices.
I do find it’s a bit difficult sometimes to ensure the 2 devices are in sight of each other when trying to change sites but it’s not impossible.
So far I haven’t had any issues and my time in range is now above 80%. I also feel I’m more likely n control and the pump is doing it’s job of keeping me in range. The only time it goes a bit awry is when I miscalculate carbs intake and that’s my fault not the pump.
Game changer! Good luck
Hi been on it a bit longer now. Pdm works well, no connectivity issues. However I am constantly running high. The auto has cut down my basal a lot. I have increased my bolus amounts. So bow I am now close to 50/50 bolus to basal amounts. Still high. I have been told to not fiddle. So now this morning I am 16.1. That's high, its because insufficient basal. I cannot control this. I have been told not to correction bolus. All my team say let it work. Been on it nearly 2 weeks. I have major laser treatments in both eyes. Cannot have any more. So if I bleed might lose eyesight. My advise at moment is don'tHi, I am currently using a Tandem T:slim with a Dexcom g6 I love the closed loop technology and use Control IQ all the time. I have the opportunity to move to Omnipod 5. The massive advantage is tubeless which really appeals to me. Does anyone have experience of the Omnipod 5? Bulkiness of the pod, connectivity issues with the pod and G6 having to be in line of site, is the algorithm similar to the T slim, does the hand held controller work well.
Any advice, pros/cons would be much appreciated. Thanks
It is all very well to trust your hospital diabetes team, and they may be wonderful. However, when you have been told 'not to fiddle' and your reading are that high, I suspect that you basal insulin ought to be higher. Even if the pump has been set up to 'learn', I cannot understand why you have been told not to do correction boluses. I will always inject a correction bolus if my readings go to 14. The sick day rules say to correct above 14. I am on a different pump, but I do correction boluses with my in insulin pen when I need them.Hi been on it a bit longer now. Pdm works well, no connectivity issues. However I am constantly running high. The auto has cut down my basal a lot. I have increased my bolus amounts. So bow I am now close to 50/50 bolus to basal amounts. Still high. I have been told to not fiddle. So now this morning I am 16.1. That's high, its because insufficient basal. I cannot control this. I have been told not to correction bolus. All my team say let it work. Been on it nearly 2 weeks. I have major laser treatments in both eyes. Cannot have any more. So if I bleed might lose eyesight. My advise at moment is don't
On this system the basal cannot be increased. I put my original basal in but it has been reducing it automatically. The first 2 days were good.It is all very well to trust your hospital diabetes team, and they may be wonderful. However, when you have been told 'not to fiddle' and your reading are that high, I suspect that you basal insulin ought to be higher. Even if the pump has been set up to 'learn', I cannot understand why you have been told not to do correction boluses. I will always inject a correction bolus if my readings go to 14. The sick day rules say to correct above 14. I am on a different pump, but I do correction boluses with my in insulin pen when I need them.
I hope that another Omnipod user will pick this up. It is interesting that the first two days were good. Have you been emailing your hospital diabetes team about the high readings?On this system the basal cannot be increased. I put my original basal in but it has been reducing it automatically. The first 2 days were good.
I have now been told not to email unless it is an emergency. My nurse only works part time anyway. Yesterday I bolused for 45g carbs, which I know was correct. But levels went 14 for over an hour. Then to 15, then 16, then finally 17.6. Then controller said to test blood and calibrate. Then to switch to manual. Which let me put set temp basal of +95%. This brought level down. 40mins later I switched back to Auto. But my problems are not lack of bolus as this was a one offI hope that another Omnipod user will pick this up. It is interesting that the first two days were good. Have you been emailing your hospital diabetes team about the high readings?
It is good that you have temporary basal facility. Perhaps the pump learns from that as well, on manual mode?I have now been told not to email unless it is an emergency. My nurse only works part time anyway. Yesterday I bolused for 45g carbs, which I know was correct. But levels went 14 for over an hour. Then to 15, then 16, then finally 17.6. Then controller said to test blood and calibrate. Then to switch to manual. Which let me put set temp basal of +95%. This brought level down. 40mins later I switched back to Auto. But my problems are not lack of bolus as this was a one off
Well they also insisting I eat straight after bolusing. On the dash I used to delay 10 or even 20 if I was high.It is good that you have temporary basal facility. Perhaps the pump learns from that as well, on manual mode?
I think that I am fortunate in that if I send an email to the hospital diabetes nurses, it could be any one of the five or six nurses on duty to read it. So I get answers on the same day. However I would not '..email... emergency'. If I have an emergency I would telephone them and, if no answer, then either 111 or 999.
I wonder how soon after bolusing do you eat? I used to bolus 20 minutes before eating, but in the last six months, or so, I find that I must bolus 45 minutes, or even one hour, before eating to avoid my readings going too high.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?