• Guest, the forum is undergoing some upgrades and so the usual themes will be unavailable for a few days. In the meantime, you can use the forum like normal. We'd love to know what you think about the forum! Take the 2025 Survey »

What is the size of the needle in an artificial pancreas or continuous glucose monitors?

if you google specifically what your looking for you may be better off, I don't think a CGM uses needles I think like the Libre it is only a filament you are actually left with and the Libre filament sits 5mm under the skin xx
 
For my DIY artificial pancreas system, the filament of the Libre that I use for the CGM element is like a thin toothbrush bristle, around 4mm long and maybe 0.3mm in width. I’m Looping with Omnipod, the soft cannula is around 7mm long and 0.7mm in width.

I imagine other CGM sensors and pump cannulas (there are metal and different angles ones available for tubed pumps) have similar dimensions.

Hope this helps.
 
Mel dCP said:
For my DIY artificial pancreas system, the filament of the Libre that I use for the CGM element is like a thin toothbrush bristle, around 4mm long and maybe 0.3mm in width. I’m Looping with Omnipod, the soft cannula is around 7mm long and 0.7mm in width.

I imagine other CGM sensors and pump cannulas (there are metal and different angles ones available for tubed pumps) have similar dimensions.

Hope this helps.
Click to expand...

Thanks you are super helpful.

Where can I buy such filaments?

How many days can they stay in the skin?
Do they clog or anything?
 
Rabdos said:
Thanks you are super helpful.

Where can I buy such filaments?

How many days can they stay in the skin?
Do they clog or anything?
Click to expand...
The filament is an integral part of a CGM sensor so isn’t bought separately. A Libre sensor lasts a fortnight before needing to be replaced, I’m not so sure about other brands like Dexcom.
 
Mel dCP said:
The filament is an integral part of a CGM sensor so isn’t bought separately. A Libre sensor lasts a fortnight before needing to be replaced, I’m not so sure about other brands like Dexcom.
Click to expand...

Can I buy one sensor like that?

I don't need the whole device, only the filament.

Where can I buy cheaply?

Also, can I buy a cannula separately?

Thanks!
 
Sensors only last two weeks because they use the same enzyme (glucose oxidase) as test strips do - and after a while the stuff just wears out. Otherwise we’d have sensors that last much longer. A sensor consists of not just the very fragile filament (plus a device to implant it into your body) but a printed circuit board, battery and an NFC element that provides data when scanned by an NFC enabled device programmed with the correct algorithm to read the electrical signal. It also needs to be sterile. You can’t just buy “a filament”.

Many of us have, however, linked these sensors with a pump via a Bluetooth transmitter, self-built app, radio link and hackable pump to form a DIY artificial pancreas system that works well, so why try to reinvent the wheel when all the components are relatively simply to acquire? I built mine for less than three hundred quid using an old MacBook and the sensor and pump I am prescribed by the NHS.

However, if your team are proposing you start insulin, you need to learn how to use the drug properly before automating it’s delivery - otherwise if your system were to go wrong, you’ll be in a world of trouble and not know why. First learn injections, then become familiar with a pump before even thinking about building a DIY APS. There isn’t any official support for that sort of system and you need to know the nuts and bolts of it inside out.
 
The leap from diet only to insulin seems like a large one to me. There are other pharmaceutical options between the two that could be tried first.
 
Hi Everyone,

Several posts have just been deleted from this thread, because of a suggestion to send clinical waste through the post

This is a link to show how complicated and regulation bound the disposal of clinical waste is, in the UK
https://www.cannonhygiene.com/suppo...-–-where-does-your-clinical-waste-actually-go
Therefore such a request would place the receiver and any courier or post office workers, at risk.

In addition, I need to remind everyone that requesting personal details (including the names and addresses of other members (including to send something to them through the post) is against our forum rules. This particular rule is intended to protect our member’s safety. Anyone ‘soliciting’ another member’s personal details will be subject to moderation.

Please can any member asked for their personal details Report such requests immediately, whether the request is on the open forum, or via PM, for the moderation team to deal with the situation.

Thank you everyone.
 
Last edited:
Rabdos said:
But I need to get hold of a sensor, do they send trials?

I cannot spend £300 on it.
Click to expand...
No, you can purchase freestyle libre sensors from a pharmacy since Abbott aren't accepting new customers to purchase online. If you call around it varies from £46-52 per sensor. Dexcom G6 which is a CGM is more expensive.
 
Rabdos said:
What is the size of the needle in an artificial pancreas or continuous glucose monitors?

Thanks!
Click to expand...

I’ve had a cgm for about a month now and it’s a lot less painful then betting shot in the chest with a pump plus it’s so much more convenient checking your glucose level via your phone then making your fingers sore with all the lancets I totally recommend a cgm it’s made keeping my bloods the right level so much easier
 
Thanks, can I ask please, does the microneedle suck body fluid up to the device and the glucose is measured there or the tip of the microneedle senses glucose under the skin?

Thanks!
 
Back
Top