• Guest - w'd love to know what you think about the forum! Take the 2025 Survey »

sd codefree monitoring help

P

paulholly

Member
Messages
10
Type of diabetes
Prediabetes
i am in the prediabetic stage reading of 44 i have bought the codefree kit and have a couple of questions i hope i am in the correct section to do this ist i messed up the setting and got the date wrong and also didnt get the warning for post meals set up im finding it impossible to reset any clues more importantly i have three readins so far a 7.6 when i did a test yesterday and today i have 6.3 prior to breakfast which was porridge and a small amount of honey two hours later i have a reading of 6.6 i have downloaded the software from sdbiosensor but i now need to get a usb lead any ideas? sorry if im posting this in the wrong area
 
Do you have the manual for the Codefree? It should have been in the box with the meter. If not, I'll dig mine out and try to help.
I bought a cable from SME diagnostics on Amazon.
 
Switch on the machine by briefly pressing the centre button, then to go into settings, press and hold the centre button for a second or two. Keep pressing the centre button through beep setting and hypo setting, then you reach the year. Adjust the year by using the arrows. Press centre button again to get to preferred format d-m or m-d, toggle back and forth with the arrows. Press centre again for month and then day, using the arrows to adjust each. Carry on in the same manner using the centre button to advance to next feature and the arrows for adjustment. Hope that helps. If you need it, here’s the link to the on line instruction manual:
https://www.manualslib.com/manual/917266/Sd-Codefree.html
 
many thanks for the help yes i do have the handbook got to put this down to my own fault will try the suggestion for resetting once again many thanks
 
When I got mine I did not bother doing any settings or down loading the software I have never set the date or time etc. I am only interested in what my blood levels are when I test it
 
@Pinkorchid I'm the same. I didn't set anything apart from the date and time as I don't always update my spreadsheet when I take the readings. I actually sent my cable back as the software didn't work very well on my ancient laptop
 
Pinkorchid said:
When I got mine I did not bother doing any settings or down loading the software I have never set the date or time etc. I am only interested in what my blood levels are when I test it
Click to expand...
Yes i am now in agreement with that its the readings that matter now i just have to try and make sense of them!
 
Back
Top