1. I've seen a worrying number of people having failed sensors, are they pretty good at quick to replace if you have an issue?
4. Can you take sensors out and re-apply?
5. How is the sensor removal - yes after around 25,000 injections I am still squeamish
Also, if you have the relevant code, you can avoid the P&P, saving thus £5.00
Which code is that please?
BCCDSDLF
My clinic arranged a trial where I got one sensor and a reader, was able to keep the reader and now use with purchased sensors. I don't use a phone but it's worth checking out models as some apparently cause sensors to fail.One other thing @Mr Happy check with your local diabetes clinic they may have some/one 'for trial' FOC
(including thinking the Christmas jumpers were attacking me in Primark).
The code changes each month, it seems, and has been available since end of last year. One way to get the current code is to register with "Abbott Freestyle Libre users" on Facebook or, the other way, is to place your order but not complete the process, leaving your order sitting in your Abbott basket. After a day or two, you'll get an email from Abbott reminding you that you still have items in your basket then, after another day or two, they will send another email suggesting you use a code for free postage, given in the emailWhich code is that please?
The code changes each month, it seems, and has been available since end of last year. One way to get the current code is to register with "Abbott Freestyle Libre users" on Facebook or, the other way, is to place your order but not complete the process, leaving your order sitting in your Abbott basket. After a day or two, you'll get an email from Abbott reminding you that you still have items in your basket then, after another day or two, they will send another email suggesting you use a code for free postage, given in the email
So, save yourself £5.00 each time
I had one erratic one, with readings that were either well above or well below my finger pricker, and unreasonably so. It also showed silly readings at the time I had a fasting glucose test at the surgery, so I had a "true" reading to compare. I sent an email to Abbott. Had a reply within 2 days asking for the serial number, then a further email to say they were replacing it, which they did very promptly.
No
It doesn't hurt if that's what you mean. It is similar to removing anything stuck to your skin. You don't see any blood or needles or anything. The filament that pierces your skin is tiny.
1. I've seen a worrying number of people having failed sensors, are they pretty good at quick to replace if you have an issue?
5. How is the sensor removal - yes after around 25,000 injections I am still squeamish
6. Does anyone use rock tape / kinaesthetic tape to help secure the sensors?
7. Is a mix of the sensor (with the price of starter pack) and the app the best way forwards?
Have to mirror these sentiments. Went from Apple to android just for this but it isn't so discreet using my Samsung Galaxy S7, especially as I seem to put the sensor in a different spot each time on either arm. Plus, as Scott-C says, screen facing out and loud, unadjustable beep (unless in silent).I've had two fail out of fourteen. Abbott have replaced them without any fuss. Phoned them on both occasions as previous posts suggested a call gets a quicker response than e-mail. They asked me to do a blood test on the Libre then wait a while to check it with a scan, so it's best to acquire some libre test strips in addition to your usual ones - I had some anyway after being given a free meter on a DAFNE course, might ask my GP to add it to my scrip. They also quiz you on the error log in the reader. I don't worry about occasional fails - it's a complex piece of chemistry going into a hostile environment which tries to attack it and clutter it up with junk so it's splendid that it works at all. This image of a mouse macrophage always cracks me up, the way it's got it's arms out like it's saying, "Coming to get ya!". As soon as you insert the sensor, your defence mechanisms start throwing that stuff at it.
Early posts in the first year suggest the adhesive wasn't strong enough,but in the seven months I've been using it, they seem to have strengthened it. It takes a fair amount of prying off. Teasing it off in the shower with a lot of soap is one way, although I've found more recently that it's easier to pry the sensor off the tape first and then take the tape off. It's not sore. The sensor is a flexible filament so it's not like there's a hard needle you're dragging out.
The sensor sits slightly proud of your skin and although the adhesive is strong, I had one fail after nudging it on a door jamb so it was still in but raised off just by a couple of millimetres. So I've started putting a big plaster on it just to smooth out the contours so it's not so easy to catch. Molnlycke do a 7 x 8 cm one called Mepore which most chemists seem to have behind the counter, not on display, 17 pence in Omnicare, but oddly 40 pence elsewhere.
I gave up using the app. The graphs are better than the reader but waving a lit up beeping phone past your arm in public isn't as discreet as a noiseless palm sized reader. Still got it on my phone just in case I lose the reader. Even though I know where the NFC aerial is in my phone, it can be a bit hit or miss getting it to find the sensor.
All in all, libre has it's quirks and foibles, but it's a game changer. One of mine packed in at the start of a working day: the rest of that day was like going back to the Stone Age. I'm a middle aged Scottish bloke, which is almost the dictionary definition of cynical. The most you'll normally get out of me is, "Aye, it's no bad." With the libre, though, I have no reservations about saying it's brilliant.
@Mr Happy
1. I've seen a worrying number of people having failed sensors, are they pretty good at quick to replace if you have an issue? Abbott are pretty good at replacing sensors, but despite what you hear, they don't fail all that frequently.
2. Are they pretty resilient for gym, swimming etc.
I've found that to be the case, and generally across the board, you only hear about the ones that have failed. Bear in mind the population of users in Europe is 50,000 people and very few of them actually spout of on social media.
3. As part of my neuropathy treatment I spend a fair amount of time in the sauna - anyone have any experience on the impact on sensors?
Sorry - can't help with this!
4. Can you take sensors out and re-apply?
No.
5. How is the sensor removal - yes after around 25,000 injections I am still squeamish
Seems to vary by user - some find it easy, other's much harder.
6. Does anyone use rock tape / kinaesthetic tape to help secure the sensors?
Yes - if you want more info join the Libre Users group on Facebook.
7. Is a mix of the sensor (with the price of starter pack) and the app the best way forwards?
If you just want to try it and have a compatible phone, buy one sensor and test it out.
8. Any advice on shaving a bit of the price in any way shape or form?
Only don't buy the reader. Use the librelink app instead. There isn't anything else you can do. You can also buy ex-VAT being diabetic.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?